4″ K-type corrugated toothed ceramic cutting blade

Here’s the English translation of the provided text:

The 4-inch K-wave tooth ceramic cutting blade, utilizing hot-pressed diamond saw blade technology, is specifically designed for cutting hard materials such as ceramic tiles. It is characterized by its sharpness and wear resistance. Below is a detailed introduction to this type of cutting blade:

I. Product Features

1. Sharp and Wear-Resistant:
   • Due to the adoption of diamond as the cutting material, the blade possesses extremely high hardness and wear resistance, effortlessly meeting the cutting needs of hard materials like ceramic tiles.
   • The unique K-wave tooth design enhances the sharpness of the blade during the cutting process, resulting in higher cutting efficiency.
2. Hot-Pressed Technology:
   • Through hot-pressed technology, diamond particles are securely embedded into the blade substrate, ensuring that the blade does not easily fall apart during use and prolonging its service life.
   • The hot-pressed technology also increases the overall strength of the blade, allowing it to withstand greater cutting pressures.
3. Versatile Applications:
   • This blade is not only suitable for cutting ceramic tiles but can also be used to cut materials such as marble, granite, and other stones, as well as concrete products, making it versatile.
   • It is compatible with various cutting equipment, including belt trimming machines and disc trimming machines.
4. High Cutting Quality:
   • The cutting surface is flat and smooth, with minimal chipping, meeting the requirements for high-precision cutting.
   • The cutting speed is fast and efficient, significantly reducing the construction period.

II. Usage and Precautions

Usage:

• Before use, please ensure that the cutting equipment is in good condition and check whether the blade is installed correctly.
• Adjust the rotational speed and feed rate of the cutting equipment according to the thickness and material of the ceramic tiles to be cut.
• Place the ceramic tiles on the cutting platform, secure them in position, and begin cutting.

Precautions:

• During the cutting process, please wear protective equipment such as safety glasses and gloves to prevent injury from flying debris.
• Keep the cutting equipment stable during cutting to avoid blade wobble or deviation that may result in reduced cutting quality.
• After cutting, please promptly clean the cutting equipment and blade of any residue to maintain equipment cleanliness and blade sharpness.

III. Maintenance and Preservation

Regular Inspections:

• Regularly check the wear condition of the blade. If severe wear or tooth deformation is found, please replace the blade promptly.
• Inspect the transmission components and fasteners of the cutting equipment for looseness or damage. If any abnormalities are found, please repair or replace them in a timely manner.

Proper Storage:

• Store the blade in a dry, well-ventilated environment free of corrosive gases to prevent moisture or corrosion.
• When storing, please lay the blade flat or hang it vertically to avoid deformation due to heavy pressure or bending.

In summary, the 4-inch K-wave tooth ceramic cutting blade with hot-pressed diamond saw blade technology is an efficient, sharp, and wear-resistant cutting tool suitable for cutting hard materials such as ceramic tiles. During use, please operate safely and perform regular maintenance and preservation to ensure the normal use of the blade and extend its service life.